|
Welcome,
Guest
|
|
TOPIC: 52 Duracraft Sportsman restoration.
52 Duracraft Sportsman restoration. 12 years 6 months ago #60568
|
adding more pictures.
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 12 years 6 months ago #60569
|
sorry for this, couldn't figure out any other way
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 12 years 6 months ago #60570
|
What I have discovered from looking this boat over, is that the bow enclosure has been cut and the dash moved forward, it had a curved windshield at one time and a steering wheel. There are also brackets for a seat back up front and loops riveted to the vertical panels of both bench seats, two front and rear of each seat. Maybe to attach a cushion?
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 12 years 6 months ago #60571
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Old tinny, anyone know who made it? 12 years 6 months ago #60579
|
The transom lines look sort of like Aerocraft, but I really have no clue. Good looking boat, though.
|
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 11 years 9 months ago #74089
|
I did finally find out that it is a 52/53 Duracraft Sportsman. Here are a few pictures of how it looks today. It's come a long way, but there is still a ton left to do.
|
|
Please Log in or Create an account to join the conversation. |
Re:Old tinny, anyone know who made it? 11 years 9 months ago #74167
|
Almost as bad! LOL Looking good!
|
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 11 years 9 months ago #74189
|
Thanks Bud!!
|
|
Please Log in or Create an account to join the conversation. |
Re:Old tinny, anyone know who made it? 11 years 8 months ago #75183
|
Hey Casey....how did you get it cleaned up so nice so far? I just picked up a '58 Alumacraft F2 with the rear console steering but it is very weathered and I suspect leaking like a sieve. It has some crap plastered on the bottom(yellowy color) and some red stuff in spots inside. It had a bunch of ice/snow partly melted in it and when I lowered it to hook it up to the car water was dripping out pretty good along the keel underneath.
What to do? re-rivet? Rhino liner, Stop Leak like I see on infomercials? I'll start a new thread when I finally get to it. |
|
Please Log in or Create an account to join the conversation.
Tim
\"Barnfinder\" If the ladies don't find ya handsome, they'd better at least find ya handy...... Red Green |
52 Duracraft Sportsman restoration. 11 years 7 months ago #76776
|
A lot of paint stripper! LOL On the sides that I plan to polish, I went an extra step with more stripper and a scotch brite pad to get all the fine paint film off. It polishes up nice with just mothers aluminum polish. When it is all done I figure on putting on some shark hide to seal and protect the shine.
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 11 years 7 months ago #76777
|
Okay, time for a little update and a few pictures. I stay busy with other projects too, especially this time of year, but I have been working on my little Jewel. I found some windshield brackets on ebay that suited me well and they look like they were meant to be on the boat (at least to me anyway) payed too much for them, but not as much as the guy did for the next set that came up LOL so I guess I really did okay. I've got them mounted and a pattern board cut for the plexiglass windshield.
I've also been working on a floor in the mid section between the two bench seats. I wont be putting one up front because you can't stand there anyway and I like the extra leg room, as for the rear, I'm not sure what I'm going to do back there, but I'm not thinking floor as much as I am brackets to hold the fuel cell and the battery in place. I plan to cover the floor with a tight loop carpet, gray in color to match the inside paint. 
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 11 years 7 months ago #76847
|
Has anybody used any of this?
|
|
Please Log in or Create an account to join the conversation. |
52 Duracraft Sportsman restoration. 11 years 6 months ago #77136
|
Put on a little paint this weekend!!
|
|
Please Log in or Create an account to join the conversation. |
Re: 52 Duracraft Sportsman restoration. 11 years 6 months ago #77139
|
m casey stock,
NEAT BOAT - HOPING that the "junkyard boat" looks as nice. yours, satx |
|
|
Please Log in or Create an account to join the conversation.
Resistance to tyrants is obedience to Almighty God.
Thomas Jefferson, 1803 |
Re: 52 Duracraft Sportsman restoration. 11 years 6 months ago #77153
|
Can't wait to see it!
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77464
|
Been doing a little polishing
Installed my "jetson" stern light. 
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77471
|
Looking great! Nice work.
|
|
|
Please Log in or Create an account to join the conversation.
1970 Glastron V-142 SkiFlite
1965 Merc 500 1968 Merc 500 |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77818
|
steering installed
Installed some hardware 
looking for the wooden flag rod that goes in the hole on the bow light, any of you guys have a lead? 
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77827
|
very nice. You are going to make the Airstream crowd jealous. The polish look great!
|
|
|
Please Log in or Create an account to join the conversation.
1960 Dorsett Belmont w/ 60 HP Flying Scott aka \"Whisky Tango\"
dorsettbelmont.blogspot.com/
Read my Jerky Blog at
JerkyAficionado.com
|
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77828
|
shacomm wrote:
LOL  thanks, I haven't though of that. Hopefully they won't ban me from the camp grounds. |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77830
|
Looking great m casey, very nice! The flag poles (staff ?) come up on Ebay from time to time. Maybe someone who has one can give you the dimensions. If push came to shove you could use a wood lathe to reproduce it, or adapt one of the currently available items. Check Jamestown Distributors and a few places like that?
|
|
|
Please Log in or Create an account to join the conversation.
Mark
|
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77891
|
MarkS wrote:
Thanks Mark, I think I'm going to make one, of course if I come across a good deal on one ready made I'm sure I won't pass it up |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #77892
|
Hey Y'all, I'm looking for the chrome center cap that goes on my steering wheel I've researched and found that it is a Nautalloy Steering Wheel from 1959. I knew it was not original to the boat, although it was part of the purchase deal. I do like it better than the original for a couple of reasons, one, it just plain looks better and two, I'm a big guy and the way it mounts gives me more room under the steering wheel. Anyway, I would love to find an original center cap for it. Here's a couple pictures.
Maybe someone has seen or has one for sale. 
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78254
|
My windshield got finished Friday! If you remember, I made a patten from a piece of flexible wall board. I sent that pattern to a glass co. in town and they cut and finished the edges using my pattern. I was going to do this myself, but they did it for $58.85. I could not even get a scrap piece of 1/4 tented plexiglass for that, so it was the best thing to do. Here's how it turned out.
Okay, I'm sure some of you noticed that RED knob, and yes I now have my controls reworked and installed. I took the little simplex apart and bead blasted the housing (after taping up the name plate) and shifter handles, painted the knobs and just put clear on the housing. Then lubed everything up good and put it all back together. Works as smooth as a new one, cables and all! 
I also took these shots because I just thought it was a neat angle. One shot really shows the inward rake of the gunnels towards the inside as it gets close to the transom. That's one reason why I like this little boat so much, and why, even though I need another boat like the proverbial hole in the head, I'd love to add a Feather Craft to my fleet. 
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78258
|
Is this the one?
Trouble loading. I do believe I have your wheel and center cap. |
|
|
Please Log in or Create an account to join the conversation.
Neil and Mary Ousnamer
|
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78259
|
Neil wrote:
Cool. Yea, it is a little tricky, lol you wanting to sell it? |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78261
|
Try this again.
www.fiberglassics.com/media/kunena/attachments/legacy/images/2-20130602-3.jpeg [/img] Can you open this link casey? This pic upload is beating me up today. I have done it a thousand times, but not this time. Wheel is not for sale. Just need an adress to send it to. I would be honored to contribute to your project. Looking beautiful. Neil |
|
|
Please Log in or Create an account to join the conversation.
Neil and Mary Ousnamer
|
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78263
|
Top Shelf work M Casey, she's really looking gorgeous!
|
|
|
Please Log in or Create an account to join the conversation.
Mark
|
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78277
|
MarkS wrote:
Thanks. Time for the wiring of the lights, ignition switch and solenoid box. I've been trying to change the flywheel on my little 88 Johnson 25hp to an electric start flywheel with the ring gear. Can't get the original one off. Any tricks you guys can think of? I've soaked the shaft with BP Blaster for a week and bumped the end of my puller with a hammer and it will not budge. I was told not to use heat due to the electronics under and around the flywheel. |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 6 months ago #78278
|
Neil wrote:
Yep, that is it! Wow, that is mighty nice for you to do that for me. At least let me mail you a check back for the cost of mailing. I'll email you with my mailing address. Let me know for sure that you received it. |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 5 months ago #78397
|
Got it Casey. I am in Ore. on business all this weeek. I will get it in the mail this coming week.
Neil |
|
|
Please Log in or Create an account to join the conversation.
Neil and Mary Ousnamer
|
Re:52 Duracraft Sportsman restoration. 11 years 5 months ago #78422
|
Neil wrote:
Thanks again so much for your generosity! It' will be a nice surprise when it shows up |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 5 months ago #78549
|
Okay, finally got it! WooHoo!!! after braking several 1/4" bolts I drilled out the holes and re-tapped to 5/16" I was then able to put full force of my 1/2" drive impact wrench on the puller and tap the edges of the flywheel, just hard enough to "ring it's bell" with all this pressure applied and it finally popped loose! Electric start coming soon
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 5 months ago #78853
|
Casey
Your wheel/centercap is on its way. Neil |
|
|
Please Log in or Create an account to join the conversation.
Neil and Mary Ousnamer
|
Re:52 Duracraft Sportsman restoration. 11 years 5 months ago #79179
|
Neil wrote:
I got a nice gift in the mail today! Gonna look great on the wheel. Trying to decide if I'm going to paint it to match the boat or have it refinished. 
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 4 months ago #79920
|
No new pictures to post, but I wanted to give an update on progress. I been working on my power plant, just basic stuff like water pump impeller, new seal behind the prop. and changing the foot oil. This is a little 1988 25hp Johnson that should push the DuraCraft just fine. The boat is only rated for a 25hp rated at the crank anyway and this year model is rated at the prop, so it's a little overrated anyway. As previously mentioned, I installed a flywheel with a ring gear for a starter to convert it to electric start. I'm looking for the starter bracket if anyone has a mid 80's to mid 90's 20hp to 35hp that they are scrapping out. Anyway, that's about it for now!
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 4 months ago #80500
|
Beautiful boat! What color is that?
My wife LOVES it, so I'm gonna have to copy you..lol. |
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 4 months ago #80545
|
Thanks! Imitation is the truest form of flattery LOL
 It's a Diahatsu single stage color with larger metallic flakes than it originally called for, I think it's bright peacock metallic. I had originally picked a nissan color, but they could not mix it in anything but base coat clear coat. I like using BC CC but I did not want to do all the extra painting so they scanned it and came up with the Diahatsu color. I'm on vacation this coming week and the actual code is at work. I'll be glad to give you the paint code, but it will be in a week before I can. |
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 4 months ago #80553
|
No rush at all....I need to get my motor and steering squared away before I even fathom painting.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:52 Duracraft Sportsman restoration. 11 years 3 months ago #82102
|
garzilla wrote:
DAIHATSU PEACOCK BLUE METALIC with larger metallic than the formula called for (because it's a boat of coarse) this is a single stage catalyst paint. I originally picked out a NISSAN color that was almost identical but I decided against BC/CC due to the extra time involved in the paint process (I actually like the looks of a BC/CC better) so they had to color match it to find a single stage formula. I can always scuff it and apply a clear coat later for more depth if I decide to. |
|
Please Log in or Create an account to join the conversation. |
|
Moderators: kensikora, classicfins, bruce gerard, billr, mrusson, cc1000, MarkS, Waterwings, jbcurt00
Time to create page: 0.344 seconds
Donate
Please consider supporting our efforts.
Glassified Ads
1967 23 ft powercat flybridge |
Mercury outboard( / Engines)
11-03-2024
Classic Mercury Outboard Motors( / Engines)
10-18-2024
FG Login
FiberGoogle
Who's Online
We have 4839 guests and no members online