TOPIC: 1958 Redfish Shark

1958 Redfish Shark 9 years 3 months ago #113176

timdeb07@sbcglobal.net Offline Fresh Boarder Posts: 3 Thank you received: 0	My brother and I are entertaining the thought of restoring a 1958 Redfish Shark, it needs a lot! Are there parts available for this boat, such as a windshield, body trim etc. Thanks for any help you can give us. Tim Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1958 Redfish Shark 9 years 3 months ago #113180

Larry
Offline
Junior Boarder
Posts: 99
Karma: 28
Thank you received: 2

Tim,

We reproduce Red Fish Shark fin caps, rub rail end caps, & rub rail clips in sand cast aluminum. We reproduce Red Fish emblems in sand cast brass. The emblems will require chrome plating. There are many shops that can reproduce a new windshield in plexi-glass or Lexan from your old windshield or a pattern. Rub rail can be obtained from Wefco Rubber.

Hope this helps.

Larry
This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in or Create an account to join the conversation.

Re:1958 Redfish Shark 9 years 3 months ago #113216

timdeb07@sbcglobal.net Offline Fresh Boarder Posts: 3 Thank you received: 0	Thanks Larry, we'll be in touch. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1958 Redfish Shark 9 years 3 months ago #113222

timdeb07@sbcglobal.net Offline Fresh Boarder Posts: 3 Thank you received: 0	Hi Larry, I tried to access your web site (This email address is being protected from spambots. You need JavaScript enabled to view it.) and you couldn't be found do you have another site I can go too? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1958 Redfish Shark 9 years 3 months ago #113231

Larry Offline Junior Boarder Posts: 99 Karma: 28 Thank you received: 2	Hi Tim, Still working on the web site. That is my email address listed above. Larry Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1958 Redfish Shark 9 years 3 months ago #113390

redfishpirates Offline Gold Boarder Posts: 559 Karma: 29 Thank you received: 4	Larry, do you do the side rub rail castings for the 1959 seashark 17ft? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1958 Redfish Shark 9 years 3 months ago #113395

oldhaven Offline Fresh Boarder Posts: 38 Karma: 3 Thank you received: 0	Can anyone recommend a decent chrome plating place for boat hardware in the New England area? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.