|
Welcome,
Guest
|
TOPIC: Speed
Speed 12 years 3 months ago #67497
|
After fixing the leaks in the trim around the sponsons the next question is speed. With a 650 i dont expect to hit 50 but what can i do to boost the speed alittle bit. I have a custom three blade 18 pitch brass prop on the motor currently and on the last gun run i hit 43.1mph. Any ideas to hit 45?
|
|
Please Log in or Create an account to join the conversation. |
Re:Speed 12 years 3 months ago #67498
|
i dont think that polishing the bottom would make a difference because at that speed the only thing in the water is the motor and maybe 6 inches of the boat.
|
|
Please Log in or Create an account to join the conversation. |
Re:Speed 12 years 3 months ago #67517
|
ballance and trim are the only thing besides the prop. put ALL the weight in the back,close to the transom as possible.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Speed 12 years 3 months ago #67526
|
I'm not sure how I would attempt this on an outboard, but on my Evinrude Playmate, my attempts to quiet the noise included adding a bilge blower to the intake which seems to act as a low grade supercharger. The boat definitely has a boost when the blower starts up. (I don't run it at low speed or idle. I is connected to a mercury switch on the spark advance)
www.fiberglassics.com/glassic-forums/22-stern-drives/63020-the-silencer.html |
|
|
Please Log in or Create an account to join the conversation. |
Re:Speed 12 years 3 months ago #67534
|
lets see a pic of what your workin with, prop,engine height etc.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Speed 12 years 3 months ago #67627
|
You can run a 19p 3 blade to get around 45@5600. Jim S. was getting good speed with his 650. What was your rpm's? pic's? Guessing the brass prop is cupped perhaps, or not? Speeds being best imo with light wind chop..Mike Anfossi hit 45 with a Merc 500 but had a pad and special prop
 |
|
|
Please Log in or Create an account to join the conversation.
3 cd g3's
1 seafair sedan |
Re:Speed 12 years 3 months ago #67667
|
Prop and engine height seem to be key for me. Like Ponyboy says, get the weight back, you want minimal wetted area to "fly" the boat at speed.
|
|
Please Log in or Create an account to join the conversation.
Bandit - 1959 Glasspar G3
See more G3s at www.g3owners.com |
Re:Speed 12 years 3 months ago #67742
|
My best speed with the Merc 650 on the G-3 was running a 3-blade brass, cupped, 21" pitch prop. I now have that prop on my Merc 1000 as that prop is listed for the Merc 1000 in the owners manuel for the 1969 Merc 1000.
|
|
Please Log in or Create an account to join the conversation.
Jim Savage
|
Re:Speed 12 years 3 months ago #68261
My best run is 52,5 mph/ Merc 1000-63/5.800rpm/Prop 22"LaserII/CMC Power trim/Engine raised 2,5" "Okie" in Sweden |
|
|
Please Log in or Create an account to join the conversation. |
Re:Speed 12 years 3 months ago #68280
|
Hello Ake, nice shot of your G3! I have several shots of your boat on my PC. Any other recent photos of your boat?
Dean  |
|
Please Log in or Create an account to join the conversation.
Bandit - 1959 Glasspar G3
See more G3s at www.g3owners.com |
Re:Speed 12 years 3 weeks ago #72158
|
Hey Derek, Did you ever make your goal of 45?
Dean |
|
Please Log in or Create an account to join the conversation.
Bandit - 1959 Glasspar G3
See more G3s at www.g3owners.com |
Time to create page: 0.192 seconds
Donate
Please consider supporting our efforts.
Glassified Ads
Mercury outboard |
Classic Mercury Outboard Motors( / Engines)
10-18-2024
1958 Skagit Sportster( / Boats)
09-25-2024
FG Login
FiberGoogle
Who's Online
We have 6384 guests and no members online