TOPIC: 1956 Johnson Sea Horse 30 hp

1956 Johnson Sea Horse 30 hp 10 years 1 week ago #102392

Joe Koen Offline Fresh Boarder Posts: 1 Thank you received: 0	Hello, I have a 1956 Johnson Sea Horse 30 HP outbard motor that I removed the screw to drain the lower gear case that I am unable to reinstall. Any ideas? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

TallTexan Offline Gold Boarder Posts: 762 Karma: 55 Thank you received: 0	You most likely removed the screw that holds the shifter in place and it moved on you. You can try laying the motor on its side and fishing around with a probe to get things lined up....if not you will have to disassemble the LU Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. CAVU

frog Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	joe, welcome aboard. and is the gasket still on the plug or is it stuck on the lower unit? sometimes the gasket will stick on the housing and will needed to be removed then put on the plug. just one of the problems that I have run into. greg Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.