|
Welcome,
Guest
|
TOPIC: Older Evinrude 200 V6 - Any good?
Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110721
|
I'm thinking about buying this but if you know me, you know that I know next to nothing about outboards. Do these engines have a reputation good or bad? Any idea of fuel usage? Any advice would be appreciated.
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110726
|
What year is it? 1970's 149ci motors didn't like regular 87 octane and sometimes fried when using 87 and cheap oils. Later 160ci motors were more tolerant. Personally, I would not run ANY V-6 of any brand or hp on anything less than 89 octane and slightly rich (40:1) mix with synthetic or premium manufacturer oil. Fuel usage isn't bad if you keep the throttle back from full, just like any other motor.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110761
|
Buy the motor if it comes with the hijacker then dump the motor and keep the lift. IMHO
 |
|
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110763
|
Are you buying the boat for the motor, or is the motor on a boat you are thinking of buying?
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110764
|
i had an 1983 200 Evinrude sport.. that motor ran like a top.. had it on a 20ft wellcraft and pushed it 50 mph.. i bought it used back in 96 and just sold it last year..it seen the back of 4 different boats while i had it... its still running now..
|
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110766
|
I have no idea how old the motor is but I'd guess 1970's. Here are two photos with the cowl off. Maybe somebody can tell me what I'm looking at. I also need to know how I tell the year of manufacture. There must be a tag somewhere with a date or a code. Where will I find it? I'm thinking of buying the boat, motor and trailer but if the motor is a clunker, I'll probably pass.
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110768
|
Go up to the first post and look at the pic. On the motor's transom bracket the I.D. tag is clearly visible. Post the model and serial numbers if you need help looking the year up.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110769
|
by looking at that ignition system.. i'd be thinking 76 - 78
76 was the first year for the 200.. and by 79 the ignition system changed.. |
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110780
|
Unfortunately, the motor is 600 miles away and there is no one available to read the tag on the engine for me. If we can assume that it is a '76 to '78 Evinrude 200, is this engine a good one, so-so, bad? Is it really a 200 HP engine? Thanks
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110797
|
Yes and no. Back when motors were rated at the crankshaft, it was 200hp, plus or minus 10%. Like Mercury, OMC liked to be on the optimistic side, so think 215. Modern propshaft rated hp will likely be around 175 or so. If it checks out and runs OK, run it with quality oil at 40:1 and it'll give you good service.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Older Evinrude 200 V6 - Any good? 9 years 5 months ago #110798
|
Somebody must like it. It's sold...but thanks for all the info.
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Moderators: kensikora, classicfins, bruce gerard, billr, mrusson, cc1000, MarkS, Waterwings, jbcurt00
Time to create page: 0.194 seconds
Donate
Please consider supporting our efforts.
Glassified Ads
1967 23 ft powercat flybridge |
Mercury outboard( / Engines)
11-03-2024
Classic Mercury Outboard Motors( / Engines)
10-18-2024
FG Login
FiberGoogle
Who's Online
We have 8520 guests and no members online