Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: OMC "Prestolite" early power tilt mechanism

OMC "Prestolite" early power tilt mechanism 3 years 4 months ago #144621

  • eperot
  • eperot's Avatar Topic Author
  • Offline
  • Senior Boarder
  • Senior Boarder
  • Posts: 181
  • Thank you received: 19
So I just bought this OMC Prestolite power tilt unit to use on my 1960 Evinrude Starflite II. I know very little about the system.



I dug around in the Library here and found the following ad:


Does anyone know when OMC first began offering this particular unit? I was under the impression they started in 1963 but then the tilt bracket on my 1960 has the mounting holes for the pump bracket, so I suppose they most have been around even earlier?

Also, without any instructions, what is the deal with the rubber hose? It's basically a brake hose with hard line ends and the one end terminates with this small bracket with two screw holes in it, and seemingly does nothing. What is this hose for and where does the end get mounted? Is it perhaps to drain or fill the hydraulic oil? Any help on this one is appreciated.

I also scored a nifty NOS tilt switch plate that will look great on my Seafair's helm.
Attachments:

Please Log in or Create an account to join the conversation.

OMC "Prestolite" early power tilt mechanism 3 years 4 months ago #144626

  • Jim L
  • Jim L's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1426
  • Karma: 60
  • Thank you received: 2
I just did away with the the unlock mechanism and hose . I don’t lock my engine down anyway.

Please Log in or Create an account to join the conversation.

OMC "Prestolite" early power tilt mechanism 3 years 4 months ago #144642

  • eperot
  • eperot's Avatar Topic Author
  • Offline
  • Senior Boarder
  • Senior Boarder
  • Posts: 181
  • Thank you received: 19
Thanks Jim but unfortunately you didn't really answer any question I have. That hose must do something....does it have anything to do with locking the engine down?

Please Log in or Create an account to join the conversation.

OMC "Prestolite" early power tilt mechanism 3 years 4 months ago #144680

  • Jim L
  • Jim L's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1426
  • Karma: 60
  • Thank you received: 2
The hose between the pump and a hydraulic activator unlocks the engine from the mount to allow it to tilt up. There’s a stiff wire between the activator and the lock mechanism that is moved to unlock it. Hope this explains it good enough.
The following user(s) said Thank You: eperot

Please Log in or Create an account to join the conversation.

OMC "Prestolite" early power tilt mechanism 3 years 4 months ago #144719

  • eperot
  • eperot's Avatar Topic Author
  • Offline
  • Senior Boarder
  • Senior Boarder
  • Posts: 181
  • Thank you received: 19
Yes, Jim, that definitely helps explain it. I can see now how there is a little pin that pushes out of the bracket on the hose end to press the unlocking feature. Thanks for the explanation!

Please Log in or Create an account to join the conversation.

OMC "Prestolite" early power tilt mechanism 3 years 3 months ago #144807

Nice find. The pre 1960 engines had a different bracket and no provision for this unit. But the prestolite tilt system was also available for Homelite / Bearcat engines as an accessory. It was likely available for other brands as well

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.175 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

TEE NEE TRAILER W/BEE BOAT
( / Boats)

TEE NEE TRAILER W/BEE BOAT
09-11-2024

FG Login

FiberGoogle

Who's Online

We have 7703 guests and no members online