Pacific Mariner 17'

Pacific Mariner 17' 13 years 10 months ago #24604

Neil Topic Author Offline Platinum Boarder Posts: 1997 Karma: 65 Thank you received: 1	I found this one this weekend. The owner says it is a 61. In the library there are the models for 1961 only. I did not find the boat there. On the dash there is a plaque that says Scimitar. Is this the model? Neil Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24605

vuyosevich Offline Contributing Member Posts: 2910 Karma: 76 Thank you received: 2	wow!!! nice find neil. the hardware is A-1. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24606

Split Offline Gold Boarder Posts: 864 Karma: 32 Thank you received: 1	Very interesting model , just found it or BOUGHT it .? That a Mercury Ride Guide steering wheel.? Omc engine . Library has Scimitar for 15 ft model. Did not know that , guess Glastron used in early 80's. WINDSHIELD tilts.?? Had a bow light like that on 58 Crosby, maybe some had metal flag staff.? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24611

Andgott Offline Contributing Member Posts: 1243 Karma: 72 Thank you received: 0	Nice one- Great lines! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24613

Neil
Topic Author
Offline
Platinum Boarder
Posts: 1997
Karma: 65
Thank you received: 1

Yes Ride Guide steering. Same as my Hydrocraft.
Tilting glass windshield.
No I have not bought it. The guy said make an offer.
It has not been in the water since 2000.
It is sitting on a Holesclaw trailer.
I actually went to look at a mid seventies tunnel hull that has been sitting for ages and run across this one. The guy who has the tunnel hull thinks it is made of gold. For sale for $3000. Rough shape.
Neil

Please Log in or Create an account to join the conversation.

Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24614

MarkS Offline Moderator Posts: 5348 Karma: 118 Thank you received: 5	Unique lines and features, great hardware, killer windshield, go for it Neil! I love it. When's the next Glassaholics meeting again? Repeat after me: Hi, my name is Neil, and I'm............. LOL Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Mark

Re:Pacific Mariner 17' 13 years 10 months ago #24616

Jim L Offline Platinum Boarder Posts: 1426 Karma: 60 Thank you received: 2	Great looking boat Neil. Looks like it would fix up nice.Plus like has been said, great hardware. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24617

Neil
Topic Author
Offline
Platinum Boarder
Posts: 1997
Karma: 65
Thank you received: 1

Boy oh boy Mark, that is it exactly.
I am working over a lumi for a co-worker right now and a guy came walking up the sidewalk and offered me $500 for it just the way it is. I could have just sold it and made room for this one.
I also have the IMP Apache to move yet and then I will have the room. I'm thinking I will have this one, but a couple of things have to get done yet. Time, time.
I am also working on the Merc 1000 shorty and the Mark 55. I picked up a needed gasket this weekend for the 55. Mid section to lower pan. I also have to go and get the Mark 75 and Mark 78 and the parts motor. Busy. busy!
Lots of irons in the fire and still shopping for boats.
My name is Neil and I AM a glassaholic.

Neil

Please Log in or Create an account to join the conversation.

Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24627

john-gibson Offline Contributing Member Posts: 4014 Karma: 324 Thank you received: 0	thats a great looking boat neil,have you bought it yet?i would love to watch your progress on it,john.p.s.does the helmet come with it,lol. and i think thats a holsclaw trailer,but its hard to see well in all that brush,cool find neil.john Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. \"too soon old,too late smart\" my pap Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.“ ---Mark Twain

Re:Pacific Mariner 17' 13 years 10 months ago #24628

Neil
Topic Author
Offline
Platinum Boarder
Posts: 1997
Karma: 65
Thank you received: 1

John
I haven't struck the deal yet.
Not sure about the helmet, but it may be my size!
And yes, good eye, it is sitting on a holsclaw.
I have to tidy up a few things in the boat department around the shop before I can persue this one, but, maybe!
If it doesn't work out, well, we all got a look at a dying in the weeds Pacific Mariner.

Neil

Please Log in or Create an account to join the conversation.

Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24661

Waterwings Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Nice find Neil! Go man GO!!!!!!!!!! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24667

Neil Topic Author Offline Platinum Boarder Posts: 1997 Karma: 65 Thank you received: 1	Thanks Bob Any progress on the 800 lately? Neil Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24776

Waterwings
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Neil,
Well I did put all the lower end parts in a box and put it in the shed.

Things have been crazy the last couple of weeks so really haven't had time to get at it. I think I'll probably pull the powerhead and take a good look at the seals, bearings and the cylinder walls. Compressions too low so the rings are probably stuck. Still kind of hard to get motivated though. I'll get there though.

Bob

Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24777

Neil
Topic Author
Offline
Platinum Boarder
Posts: 1997
Karma: 65
Thank you received: 1

Bob
When I was disassembling my 1000, I had taken off the covers on the intake sides, and with a pencil with the lead broken off so as to not nick anything up, I moved the rings in and out and thought that they were not stuck at all. When I pulled the crank/rods/piston assembly out of the block, all of the rings were stuck on the exhaust side. That was an lesson to me. Learning all the time.
It was discussed in one of the threads here about lugging these 6 cylinder motors. They tend to coke up. I saw it first hand with my 1000.
This is probably an obvious read for the guys that have been running and maintaining these Mercs, but for me it was a great lesson. All good stuff.
Neil

Please Log in or Create an account to join the conversation.

Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24779

Waterwings Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Neil, Cool thanks. I'm betting that's probably the case for mine. I'm afraid to look though considering what the lower unit looked like and that was not the original unit so………… We'll have to wait and see. Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24787

crosbyboat Offline Contributing Member Posts: 677 Karma: 31 Thank you received: 0	I also found a Pacific Mariner this summer on the road from Idaho Falls up into Glacier Park. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 10 months ago #24788

Neil Topic Author Offline Platinum Boarder Posts: 1997 Karma: 65 Thank you received: 1	I like the hull shape better on this one you found. Did you save her? If not, can I persue it? Neil Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Neil and Mary Ousnamer

Re:Pacific Mariner 17' 13 years 10 months ago #24880

crosbyboat
Offline
Contributing Member
Posts: 677
Karma: 31
Thank you received: 0

Have at it Neil! There's about 3 good ones on the road from Idaho Falls to Glacier including a gorgeous Aristocraft Funliner I/O. As I recall the PM and AFL were both reasonably close to the B-I-G lake on the way to Glacier Park. I'm sure my wife will remember the name but durned if I can! I'd rather have the Power Cat just outside of Idaho Falls I found!

I think the lines on the PM I found were too cool. Great tumble home transom.

Brian

Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 2 months ago #46792

Dozzy Offline Fresh Boarder Posts: 1 Thank you received: 0	I am no boat owner or anything, but my Grandfather in the LC valley (ID) owns a red version of this boat, and he told me that this is a 1965 Pacific Mariner Scimitar. I just became a member just so I could tell you this and also so I could hopefully find out more about that make of boat. Dozzy Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 2 months ago #46804

s.k. moldoon
Offline
Fresh Boarder
Posts: 5
Karma: 1
Thank you received: 0

Nice find! I have a Pacific Mariner also. My boat model is the “Lance” I think they (Pacific Mariner) named all their models after some kind battle weapon.

I believe mine is 15’. It’s a little to small for my taste but then again the boat says I’m a too big and fat for it also. I wish it were 20’ then I would really love here.

They are really nice boat for the era. Good looking too if you ask me.

Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 2 months ago #46812

frog
Offline
Platinum Boarder
Posts: 1431
Karma: 59
Thank you received: 3

hey sk, all my boats say that iam too fat for them. i have 5 and all are 14 ft. i just like the small boats, and i do fill them up. i get alot of kidding from other people and i love it , i have no will power to diet so iam going to be fat the rest of my life. i have not posted a picture of myself on fg as iam old fat and ugly, and i think they will take away my membership. lol. frog.oh W T H this is scary so if your weak sit down please. frog. iam the big guy the little guy is my grandson and best pal.

Attachments:

Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 2 months ago #46814

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	That's not fat, that a roof over the tool shed. The '63 Dorset that that I had purchased as a doner also had an OMC, 75hp Evinrude starflyte with the ride glide steering, also had the tilting glass windshield, both are going on my Herters. Nice find for you. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 13 years 2 months ago #46819

OFFSHORE GINGER Visitor	Hey guy , nice looker and so is the scenery ...........wow ! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: Pacific Mariner 17' 12 years 8 months ago #58489

SteveStraub Offline Fresh Boarder Posts: 1 Thank you received: 0	Where is that boat? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Pacific Mariner 17' 2 years 4 months ago #146908

jsteinbauer Offline Fresh Boarder Posts: 29 Thank you received: 0	Hi, I also ran across a Pacific Mariner today. The owner said it was a 58 17'. I've not been able to find out much about the brand or model. Any info would be appreciated. John Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

TOPIC: Pacific Mariner 17'