Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Getting Homelite ready

Getting Homelite ready 14 years 8 months ago #3167

  • elgindave
  • elgindave's Avatar Topic Author
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 683
  • Karma: 10
  • Thank you received: 0
Been taking measurements of the valve clearences. Had to replace the cam because of a broken distributor drive key.
Put my order into Bill Roberts for the proper spacers.
Getting it ready for the pontoon. Next project, rebuild 56 Merc MK55 carbs which is on my Mirror Craft fishing boat.
Also got a 68 Merc 650 to get going. Lots of projects.
Also hope to get the Lone Star back in the water. Powered by a 62 Merc 700 FGS.
The 1960 Larson All- American will probably be in dry dock this year. :silly:
Attachments:

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3181

  • abw
  • abw's Avatar
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 17
  • Karma: 2
  • Thank you received: 0
Been through that valve adjustment, it was a Fageol V.I.P, same basic design. Have another Homelite coming shortly to work on, I realy like these motors.
You mentioned a Lone Star, what model/year? i'm trying to find a seat refference for a Malibu.
Good luck with your projects!

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3182

  • abw
  • abw's Avatar
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 17
  • Karma: 2
  • Thank you received: 0
'62 Fleetwood, nice!
I never remember to check "my boats" first. :)

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3199

dave, let me know the mph you get with the 700. ron

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3205

  • billr
  • billr's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 621
  • Karma: 51
  • Thank you received: 0
Dave,
Received your ignition switch assy.
See pics, we need to replace it, there was nothing left in there but rusty dust!

Picking out your valve shims now, will ship tomorrow via USPS Priority Mail.
Attachments:

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3209

  • elgindave
  • elgindave's Avatar Topic Author
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 683
  • Karma: 10
  • Thank you received: 0
Yep. 62 Fleetwood. 17' The original seats did not come with it.
I got a copy of a flyer somwhere with the specs.

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3210

  • elgindave
  • elgindave's Avatar Topic Author
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 683
  • Karma: 10
  • Thank you received: 0
Ron I haven't run it in a couple of years. I think it would go about 30 with a 15" pitch 3 blade prop. Using the speedometer that is on the boat.

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3252

  • billr
  • billr's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 621
  • Karma: 51
  • Thank you received: 0
Dave,
Check this out, we had ALL of your requested parts in stock new on the shelf.

All 8 valve spacer shims.
The cam spacer too!
And of course, your replacement ignition switch with key as noted above. When it arrives take the key to locksmith and get a spare made, I was down to the master on that one and you can get a key made cheaper than I can sell it to you so we both win.
And that's the name of the game.

I am shipping your parts USPS Priority Mail today, you will see them in 2-3 days per USPS.
Attachments:

Please Log in or Create an account to join the conversation.

Re:Getting Homelite ready 14 years 8 months ago #3264

  • elgindave
  • elgindave's Avatar Topic Author
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 683
  • Karma: 10
  • Thank you received: 0
Bill R.
Thanks a load.
I knew I could count on you. You are my Homelite Guy.
Attachments:

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.179 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

1958 Skagit Sportster
( / Boats)

1958 Skagit Sportster
09-25-2024

FG Login

FiberGoogle

Who's Online

We have 7965 guests and no members online