Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: 1963 Sea King Runabout project

1963 Sea King Runabout project 8 years 5 months ago #124454

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
I just pick this boat up from a guy who got it from his brother who got it from the current registered owner. The Title was lost so Im going through the steps to get a new title or a Bonded one.

This little boat is kind of simple so me being the newbie to boating thought what the heck! I have no stinkin idea what Im doing, but I believe that the things I need to do to it can be done rather cheaply.

I would appreciate any and all ideas and advice on this particular restore.

It has a 1963 Johnson 60HP Motor which has been set on top of a thick piece of wood that was cut to fit on top of where the smaller motor was mounted.

I would like to replace the cables, Throttle and Steering and get that old steering wheel cleaned and possibly powder coated so its white again. It shined up pretty well after washing and rubbing on it for a bit.

The other thing is that it needs new seats and I just got the new fuel lines and gas tank. Dont forget the plug! haha. Got one! ;)

So I have a couple photos and you can tell me what you think. Hope to see some responses before long. Thanks y'all! Name is Vinn

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project (Pic 1) 8 years 5 months ago #124455

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
This is before I got it home

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project (Pic 1) 8 years 5 months ago #124456

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
This is before I got it home
Attachments:

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project (pic 2) 8 years 5 months ago #124457

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
pic 2
Attachments:

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project (pic 3) 8 years 5 months ago #124458

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
pic 3
Attachments:

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project (pic 4) 8 years 5 months ago #124459

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
Pic 4. Kinda perdy huh?
Attachments:

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project 8 years 4 months ago #124900

Sweet! I like it. I'm looking at a horn like that too; I think they look cool.

Why did you take the windshield off? Just curious.

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project 8 years 4 months ago #124902

  • VVV
  • VVV's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 0
Hey, Thanks for commenting on my post. The window had only been put in place for the photo. It was taken off when I bought it already. Im going to replace the window due to spider webs in the plastic. It way cloudy. I liked the look though when it was off. Ill reinstall after getting the new window ;)

The restoration has hit a speed bump. I am moving so I must wait and see if I can bring it with me. I hope to have it cleaned up and running great by next season. The lake is a block away, what a shame not to be able to get on the water. I can see it now. Gonna be great!

Please Log in or Create an account to join the conversation.

Re:1963 Sea King Runabout project 8 years 4 months ago #124920

Yeah, man, I hear ya! My father-in-law has his own dock on the lake and we want to get ours out there too!

Did you call a local glass shop to get a replacement for the windshield or are you searching for a new old stock? Just curious because I think mine will clean up okay but I haven't paid much attention to it and was wondering what to do if it was ineffective.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.195 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

1958 Skagit Sportster
( / Boats)

1958 Skagit Sportster
09-25-2024

FG Login

FiberGoogle

Who's Online

We have 7520 guests and one member online