TOPIC: Stubborn Powerhead Bolts Video

Stubborn Powerhead Bolts Video 9 years 10 months ago #103867

milkdud Topic Author Offline Gold Boarder Posts: 563 Karma: 42 Thank you received: 3	Taking my time backing out exhaust plate bolts from my 1350 today. Here is a video showing my technique to getting them out whole. C Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable. The following user(s) said Thank You: Lakeplay, Brad58
	Please Log in or Create an account to join the conversation.

Re: Stubborn Powerhead Bolts Video 9 years 10 months ago #103868

daveswaves Offline Expert Boarder Posts: 396 Karma: 36 Thank you received: 0	First video of the year Conrad, Nice. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Remember, my opinion in no way diminishes your opinion, nor yours mine. Collectively, there is a middle ground that is \\\"correct\\\" for the reader balancing all the input.

Re:Stubborn Powerhead Bolts Video 9 years 10 months ago #103869

Normspeed Offline Gold Boarder Posts: 528 Karma: 22 Thank you received: 1	Great stuff, thanks. Do you ever reuse those bolts after cleaning the threads with a wire wheel? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Stubborn Powerhead Bolts Video 9 years 10 months ago #103870

dave bernard Offline Platinum Boarder Posts: 1471 Karma: 95 Thank you received: 30	I would guess heating the bolts in from the sides is a bit harder? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Stubborn Powerhead Bolts Video 9 years 10 months ago #103872

firstfibre Offline Expert Boarder Posts: 321 Karma: 4 Thank you received: 0	Have you ever tried heating the whole block in an oven first, maybe the the overall temp up since that aluminum really pulls the heat out quick? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Stubborn Powerhead Bolts Video 9 years 10 months ago #103877

milkdud
Topic Author
Offline
Gold Boarder
Posts: 563
Karma: 42
Thank you received: 3

I typically re-use the bolts as long as they look good. Most times they clean right up. No I have not tried the oven trick yet. I think is more of a heat/pressure differential that actually draws the penetrant in. Just my quick guess. If the whole block is warm I am not sure if it would work the same?

Please Log in or Create an account to join the conversation.

Re:Stubborn Powerhead Bolts Video 9 years 10 months ago #103879

firstfibre Offline Expert Boarder Posts: 321 Karma: 4 Thank you received: 0	I was just thinking heating the aluminum would make it expand and hopefully open them all up enough to suck up the penetrant guess I will have to test it but thanks for the video, I'm new to this and don't want to ruin things by just hacking at it. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Stubborn Powerhead Bolts Video 9 years 10 months ago #103888

milkdud Topic Author Offline Gold Boarder Posts: 563 Karma: 42 Thank you received: 3	You may be right. Its worth a try in my opinion. Conrad Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Stubborn Powerhead Bolts Video 7 years 1 month ago #134404

Lakeplay Offline Junior Boarder Posts: 60 Thank you received: 11	milkdud wrote: Taking my time backing out exhaust plate bolts from my 1350 today. Here is a video showing my technique to getting them out whole. C Thanks for posting this. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.