Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: 72-73 mercury 1150 troubles

72-73 mercury 1150 troubles 3 years 11 months ago #142213

First thank you for letting me join your forum. I am having trouble getting my motor to start. I had this posted on iboats but thought that I'd try over here with you guys.

fuel pumps are replaced, carbs cleaned (seats and float needles replaced as well as gaskets). Idle screws set to 1 1/2 turns out.

The problem is I can't get it to start or stay running without raising the neutral throttle lever over half way.
I replaced timing belt last summer so I double checked it it's off to the right 1/2 tooth from what I saw online that is where I want it. Its timed to 2° tdc and 20° tdc for idle and max timing advance. I did that based on a YouTube video showing how to do it not running but power on. He said 5° and 20° but his motor is newer and called for that number in the service manual. Mine calls for 2°.

compression test on all six cylinders was done as my first cranks this year numbers are.

Compression
Cyl #6 : 80-2
Cyl #5: 80-2
Cyl #4: 80-2
Cyl #3: 86-88
Cyl #2: 86-88
Cyl #1: 85-87

seems awfully low to me but it's not been ran since last summer and these are the first cranks I've done this year. Don't know if that has anything to do with it. Also low as they are they are very close together. It was done with a brand new harbor freight compression tester I've seen some mixed reviews on it .

New spark plugs autolite 2872. New plug wires as well.

my question is. Is my info correct and if so is there something I missed and/or why is it not starting?

Please Log in or Create an account to join the conversation.

72-73 mercury 1150 troubles 3 years 11 months ago #142218

Give me a call 1 914 310 7086.

Please Log in or Create an account to join the conversation.

72-73 mercury 1150 troubles 3 years 10 months ago #142232

Sorry it took awhile to get back to you I've been called back to work. I played with the carbs some more got it started and adjusted idles good now only has a slight twitch every few rpms. Which is smother than my truck lol. I'm pretty sure that compression tester is junk. This is only with muffs on I know I've got more to do once the water warms up. 

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.160 seconds

Donate

Please consider supporting our efforts.

FG Login

Glassified Ads

1975 16ft Cobalt
( / Boats)

1975 16ft Cobalt
03-27-2024

Homelie/Bearcat
( / Engines)

noimage
03-17-2024

Thunderbird Apache 1956 hardtop
( / Boats)

noimage
03-10-2024

FiberGoogle

Who's Online

We have 6590 guests and one member online