TOPIC: New to the forum and need help!

New to the forum and need help! 14 years 2 months ago #2072

carpromo Offline Fresh Boarder Posts: 14 Thank you received: 0	Hi, and thanks for your time. I have a 1968 MERC 1250 and I need to replace the clamp handles as 1 is broken. How do your replace the backing washer to the clamp to secure the washer. I probably called alls items by the wrong name but thats all I know. Thanks in advance. Scott Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

dave bernard Offline Platinum Boarder Posts: 1470 Karma: 95 Thank you received: 30	i use a ball peen hammer there was a special tool for that job. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

tim_c Offline Junior Boarder Posts: 87 Karma: 11 Thank you received: 0	Dave's right there is a special tool. But if you don't have one a Ball peen hammer will work. You don't need to peen it much just enough to keep it from sliding off. Tim Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.