Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Source for Gaskets

Source for Gaskets 12 years 6 months ago #60872

Found the gasket sets I need for the water pump on MarineEngine.com, via Sierra Marine, but have to spend at least 10 bucks before they will ship, and the shipping is 10 bucks.
Anyone have a good source?

the Merc Parts
27-32438; pump base to gear housing
27-32433; pump base to face plate - lower
27-32434; pump base to face plate - upper

Please Log in or Create an account to join the conversation.

Re:Source for Gaskets 12 years 6 months ago #60881

  • ed-mc
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1412
  • Karma: 232
  • Thank you received: 117
Try www.boats.net

I order parts from them on a regular basis and they have very reasonable shipping charges. $10.00 and under orders ship for $1.75, it'd be difficult to do better than that!

Seaway is great for hard-to-find parts and I do order from them when necessary, but they sure don't have a "discount" shipping rate. You do get it fast but it's hard to pay $10-15 for shipping on a 2-bit part.

The gaskets you need are pretty cheap but if you were ordering several parts totaling over $10, you could split them into multiple orders to save shipping.

$10.01 to $60.00 is only $6.95 which IMHO is very reasonable considering prices elsewhere.

Here's your parts:

www.boats.net/parts/detail/mercury/outboard/M-32438.html

www.boats.net/parts/detail/mercruiser/sterndrive/M-32433.html

www.boats.net/parts/detail/mercury/outboard/M-32434.html

Howzzat for cheap (I prefer Frugal)!!

HTH.........ed

Please Log in or Create an account to join the conversation.

Re:Source for Gaskets 12 years 6 months ago #60922

You can't make them any cheaper!

Please Log in or Create an account to join the conversation.

Re:Source for Gaskets 12 years 6 months ago #60953

Thanks Ed!!
Found everything I was looking for to rebuild the water pump!

Please Log in or Create an account to join the conversation.

Re:Source for Gaskets 12 years 6 months ago #61234

Rebuilt the water pump. Was more expensive than I thought it should be. $23 for the upper and lower oil seals, $18 for the impeller, an new rubber sleeve into which the water tube mounts (down inside the upper half of the pump housing) a few bucks for three years worth of gaskets, $7 for shipping, etc, In the end almost $70. But you gotta have water......

Before



After - even a new plastic guild ( replacing the one that I melted somehow)

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.161 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1967 23 ft powercat flybridge
( / Boats)

noimage
11-17-2024

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

FG Login

FiberGoogle

Who's Online

We have 6603 guests and no members online