SS prop anode clearance?

SS prop anode clearance? 14 years 5 months ago #9892

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	I've got 1/8 maybe 3/16 clearance here for this SS chopper blade. Is that sufficient? SS - no flex right? Thanks! Frank Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9897

dave bernard Offline Platinum Boarder Posts: 1471 Karma: 95 Thank you received: 30	I'd give it more just to ge safe.maybe 1/2in. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9899

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	Sounds good Dave, that's what I'll do. Thanks! Frank Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9941

gil_72gt-160 Offline Senior Boarder Posts: 189 Karma: 14 Thank you received: 1	heres what i did to mine Frank . Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9943

JerrfyLube Offline Expert Boarder Posts: 276 Karma: 6 Thank you received: 0	I think i would clearance that tab out just a bit more(maybe another 1/4 inch up and a 1/4 inch back or so)...i would imagine spinning a prop that fast, even with a stainless one, could easily flex more than an 1/8th of an inch. Would REALLY suck to ruin such an expensive prop!! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9951

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	Here's what I ended up with. Also, found a # on the prop, 48-61902. 14" diameter, 22 pitch. Cupped two blade. Try it out tomrrow night. Wish I could tonight, but potential weather, and lateness of dinner make it not a good night. Frank Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9952

dave bernard Offline Platinum Boarder Posts: 1471 Karma: 95 Thank you received: 30	looks good now. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9955

kingdve Offline Junior Boarder Posts: 57 Karma: 2 Thank you received: 0	YOUCH ! thats a prop there buddy ! still think you should try this 20 Laser I have , good bow lift n lots of bite ... finaly got the battery in the black beast needs a bath n wax then its fast river time ... I can bring a rope n tow ya if need be ! (wink0 Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9956

Kerry Offline Gold Boarder Posts: 675 Karma: 51 Thank you received: 2	That's a pretty wicked looking prop, Frank!!! Hope it cures all ills and adds to the grin factor!!! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9958

JetDeville700
Topic Author
Offline
Platinum Boarder
Posts: 3271
Karma: 38
Thank you received: 3

kingdve wrote:

YOUCH ! thats a prop there buddy ! still think you should try this 20 Laser I have , good bow lift n lots of bite ... finaly got the battery in the black beast needs a bath n wax then its fast river time ... I can bring a rope n tow ya if need be ! (wink0

I'd love to try it Dave. we will be at the Henry Hudson boat launch in Bethlehem tomorrow night (if all goes well) between 5 and 5:30. I'm bringing my 3 blade 21 pitch prop too, at least I know I can get out and have some fun with it, even if I do keep porpoising. Gail is bringing some kind of dinner with us, like sandwiches and chips er sumpin.

Frank

Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9959

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	Kerry wrote: That's a pretty wicked looking prop, Frank!!! Hope it cures all ills and adds to the grin factor!!! Yeah, well, it ain't mine Kerry, but at least I can see if it works. Gonna figure this out sooner or later. Hopefully sooner! Frank Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9977

JerrfyLube Offline Expert Boarder Posts: 276 Karma: 6 Thank you received: 0	If you ever wanna sell that prop, let me know!! That would be PERFECT for my Challenger!! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #9981

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	It ain't mine, just borrowing it for a test. I may want to buy it! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 5 months ago #10021

JerrfyLube Offline Expert Boarder Posts: 276 Karma: 6 Thank you received: 0	PC1000 wrote: It ain't mine, just borrowing it for a test. I may want to buy it! Well if you dont, pass on the others name to me... Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 4 months ago #10293

63g3
Offline
Contributing Member
Posts: 465
Karma: 62
Thank you received: 2

The anode should be flat for these props, remove the fin completely. It has NO effect as these props should be run on a motor where the cav plate is above the water, so the anode is not in the water at all at speed. If you can't run the motor high then this is not the prop. It's looks like an older Merc "elephant ear" Good bow lift etc. but the newer three blade lasers or equivalent would be better still. that said it's a great vintage prop form the early 70's.
I too would be interested it's the right pitch. I have a restored 74 Vector with an inline and that prop would be correct vintage and size. That said, good luck, I hope that it works for ya.
Randy

Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 4 months ago #10585

nessman Offline Fresh Boarder Posts: 49 Karma: 1 Thank you received: 0	I removed the anode because of prop clearance issues... boat doesn't run much more than 20 MPH, always in fresh water, stays up on a hoist when I'm not running. I suppose I could get a flat anode or grind down what I have now... Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 4 months ago #11074

dpanky Offline Junior Boarder Posts: 109 Karma: 11 Thank you received: 0	Or simply get a Mercury setback trim tab. It also has the advantage of alot of area to counter any torque. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 4 months ago #11165

Smoke Offline Fresh Boarder Posts: 20 Thank you received: 0	merc makes a anoiod for raked props you may be able to match one of these with the cutout in the cav plate Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:SS prop anode clearance? 14 years 3 months ago #12797

Ponyboy Offline Gold Boarder Posts: 605 Karma: 24 Thank you received: 0	Just take it off, you dont need it. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

SS prop is gone back to owner 14 years 3 months ago #12814

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	I borrowed that prop from Brian Lawson. I got it back to him, and it's now on his Missile with the shorty 1350. End of story. Frank Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

TOPIC: SS prop anode clearance?