Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Water circulation on a in board

Water circulation on a in board 11 years 1 month ago #82646

  • Qdanj
  • Qdanj's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 0
Hey all, simple question for those with stern drive knowledge. I overheated a 350 Buick V8 in a Fabuglas Triton 220 on the weekend. I haven't trouble shot for engine damage but was wondering how that could of happened? I was in a no wake zone idling around when it heated up. By the time I noticed the temp gauge was at 230 and there was a blow by smoke trail. It ran fine after cooling but when I checked the block it didn't seem to have any water in it. Any ideas would be helpful. Is there a water pump in the stern drive or just the engine?

Thanks always

Dan

Please Log in or Create an account to join the conversation.

Re:Water circulation on a in board 11 years 1 month ago #82656

  • Robby321
  • Robby321's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 902
  • Karma: 42
  • Thank you received: 10
Depends on the outdrive. My Volvo Penta had the pump run off the engine belt, to the block, then the circulation pump through and out the risers. The block should have water in it regardless.

Please Log in or Create an account to join the conversation.

Re:Water circulation on a in board 11 years 1 month ago #82696

Most sterndrives have 2 pumps.
One in the drive to lift raw seawater to the engine and a circulation pump on the engine itself.--The circulation pump on the engine is often different from the automotive equivalent.
Water pumps in the drive are often / should be replaced when they are still working well.

Please Log in or Create an account to join the conversation.

Re:Water circulation on a in board 11 years 1 month ago #82697

  • Qdanj
  • Qdanj's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 0
That's the info I was looking for (I think). Because the block was empty I suspect there is a water feed issue. The Buick water pump on the350 is likely not the issue but I was unsure about a feed pump in the stern drive. Any idea how I can test it with the boat on the trailer? Now if I can find a 1969 stern drive manual.......think it's OMC........I think?
Thank you very much.
Dan

Please Log in or Create an account to join the conversation.

Re:Water circulation on a in board 11 years 1 month ago #82728

  • Robby321
  • Robby321's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 902
  • Karma: 42
  • Thank you received: 10
Dunno much if anything about OMC outdrives. I had a Volvo Penta 280, no water pump in the the leg, only the one run off the engine.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.161 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

TEE NEE TRAILER W/BEE BOAT
( / Boats)

TEE NEE TRAILER W/BEE BOAT
09-11-2024

FG Login

FiberGoogle

Who's Online

We have 7724 guests and no members online