'53 18' Century Resorter finally

Re:'53 18' Century Resorter finally 9 years 3 months ago #115156

Waterwings
Topic Author
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Got the chine blanks planed down and still able to get on the water again yesterday! Woo Hoo!

So out of the two 10/4 x 6 19" blanks I ended up with I was able to get two good chine blanks. Well one has a knot that needs to be routed out and filled with wood but it will work. I'm going to use the two bad ones as practice blanks for steaming. I'm also going to go with the bag steaming. After doing a little more research you use the 6mil drop cloth clear poly and iron it between parchment paper to seal it. I got a 10'x 25' for reasonable at Lowes and I'm going to make one just for the chines 10' long. I'll have plenty left to make custom bags for the planks that need it.

Bob

Attachments:

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 3 months ago #115159

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	Smart move with the practice planks. Hope it works out for you, good luck. With any luck on my side I'll be on the water tomorrow. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115193

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks Cal, hope you made it out today. Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115213

Shelby18 Offline Contributing Member Posts: 436 Karma: 18 Thank you received: 0	This is one of my favorite threads. I just love seeing your progress. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Great to be on board. Rick

Re:'53 18' Century Resorter finally 9 years 2 months ago #115223

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks Rick, I just wish it was further along than it is. Life keeps getting in the way! LOL Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115263

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Well I was able to get the steam tube made. Hope to try it in the next day or so. Yeah there's a bit of a curve but I made it slightly oversize so it shouldn't be a problem. IF it is no big deal I have another 10' x 24' left over. Bob Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115269

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	Neat! get some pics of it in action. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115271

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Will do! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115274

73Crestliner Offline Senior Boarder Posts: 228 Karma: 9 Thank you received: 0	Keep at it. Good to see the progress. Thanks for posting the pics - we can all learn from this. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115287

Eduardo Offline Expert Boarder Posts: 309 Karma: 35 Thank you received: 5	Bob, I'm with Rick, enjoying this thread and seeing its progress a little at a time. Keep up the great work. Eduardo Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115301

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks guys, I'm tryin'. I truly thought I'd have had planks on by now and plugging away on the topside. Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115309

agleason Offline Expert Boarder Posts: 327 Karma: 25 Thank you received: 1	Your proves the old adage, it will take twice as long and three time as much. Keep up the good work, we are following you closely! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Andrew Gleason Easley, SC My 1964 Johnson Deluxe Chevy 327 V-8 Resto-Mod (CLICK ME) OMC Boats Thread (CLICK ME) Latest video of Deluxe (CLICK ME)

Re:'53 18' Century Resorter finally 9 years 2 months ago #115346

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks Andrew! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115441

Waterwings
Topic Author
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Well got the steamer set up to try and steam the practice chine. It works!!!! The 6mil plastic tube worked like a charm. I was able to do I all by myself but I will need another hand or two when it comes time to do the real thing. I ran out of time when I got to frame 1, couldn't quite get it tight enough.

[img] [img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/Sream_pipetube.jpg

Now I can trim off a foot or so off the front end and use it to make a practice end to make sure it fits the stem correctly. Use it to shape the ends of the good chines then steam away!

That tube idea is great, you don't loose precious time carrying the board to get clamped, as its drying. And the best part is you can make the tube any size you want.

Bob

Attachments:

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115444

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	Wow! Glad it's working out for you. Need a break from your 80hp. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115446

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks Cal, yah that damn 80hp keeps kicking my a$$! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115461

Chuck in Cincinnati Offline Gold Boarder Posts: 967 Karma: 46 Thank you received: 43	WOW !!! Looks Great ! I’m glad it worked well. How long did it take to steam ? Was there a lot of spring back when you unclamped the chine to take the bag off ? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115469

Waterwings
Topic Author
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Chuck, two hours to steam, basic rule of thumb is an hour per 1" of thickness or 15 minutes per quarter inch of thickness. Not spring back as of yet since I steamed it while it was straight then bent it into place after sliding the bag off. I'll probably take the clamps off tonight and see how much it springs back. I'll leave the clamps of for at least two days when I do the real chines to make sure it's completely dry.

Bob

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #115484

redfishpirates Offline Gold Boarder Posts: 559 Karma: 29 Thank you received: 4	super cool....glad it's movin along again!!! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #116109

Waterwings
Topic Author
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Well I said the heck with the 80hp for a little while. I will do what Bruce said and see what it looks like after some more lapping and blue test. BUT it was time to get back to the Resorter so I finished carving the chine ends yesterday and steamed them today. They're in Woo Hoo!!!!!!!!!!
Steaming on the starboard chine.

Starboard chine on and clamped. Admiral wasn't available to take pics on this side.

Port chine steaming.

Removing the bag.

Time to clamp.

Working on the stem clamping. It's the hardest part.

More stem clamping work.

Done. The Jorgessen clamp you saw on the starboard stem pic was to just hold it in place until the other chine was steamed and ready to clamp. The strap worked great.

Bob

Attachments:

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #116115

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	NICE! Looks like a full days work. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #116119

charles Offline Junior Boarder Posts: 127 Karma: 1 Thank you received: 0	Looking good can't wait to see it done been watching your work nice Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 months ago #116172

Dave the Wave Offline Contributing Member Posts: 493 Karma: 21 Thank you received: 0	Wow! Amazing! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Florida's Amphicar restoration destination

Re:'53 18' Century Resorter finally 9 years 2 months ago #116188

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks guys, it's getting there slowly but surely. Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 3 weeks ago #117579

Waterwings
Topic Author
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Well you probably though I gave up. I didn't just a lot of life stuff keeps popping up. I've had to get the garage and house cleaned up to get ready to sell. Haven't even started on the boat shed. Have to get the boat in a condition to where I can load it on a trailer to move it. I

I got the batten blanks re-sawn and planed and cut to 1 1/2" in widths. I think if I get the chines in, bedded and bolted down and have the battens all in and bedded I should be able to lift the boat onto a trailer without torqueing it.....I hope.

Bob

Attachments:

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 2 weeks ago #117610

Luckyramu Offline Fresh Boarder Posts: 16 Thank you received: 0	You are doing an incredible job on your 18' Resorter. The photo with the chine looks like a work of art. Take your time and keep plugging away at it. It'll be in the water before you know it. Keep posting this wonderful thread. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 1 week ago #118033

Waterwings
Topic Author
Offline
Contributing Member
Posts: 4887
Karma: 107
Thank you received: 100

Well mid 60's all weekend so I got more stuff done.

Got the chines bedded down and the 1x4's screwed down to rout the keel rabbets.

Fortunately/Unfortunately that's when I found out the frame 1 1/2 on the starboard side wasn't right so I had to take the screws out and get the Fein multi-tool, with the slicing blade, out and slice through the 5200 to make another short frame. Sorry no pics, too embarrassed.

Anyway it's got it's first coat of CPES on it and waiting for it's second one tomorrow.

I also was able to get all the kerf's cut into the battens. I should be able to resorcinol them tomorrow also I hope.

This is a close up of the kerf jig. I made a long tale so I could clamp the batten to the jig and a board so it all doesn't slide around.

Bob

Attachments:

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 1 week ago #118038

frog Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	Bob, looking real good, but makes not wanting a wooden boat. lol. wow your going to start page 7. when your done with your boat print all of it off and publish a how to do book. greg Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 6 days ago #118059

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	Hey Greg, there already is a book-- or two -- but Bob could put a few addendums to them all Nice progress Bob, you're spending more time making jigs that I probably spend redoing my whole Sabre. Looks beautiful. Cal Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 6 days ago #118092

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Thanks guys trying to keep plugging away! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 9 years 6 days ago #118097

bilnan1 Offline Contributing Member Posts: 900 Karma: 63 Thank you received: 14	I sure am glad you numbered each piece when you took apart,I am glad u r doing this like I said I cant do wood,,this is a mazing just to read,,congrats Bill Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118339

Karsten Offline Junior Boarder Posts: 104 Karma: 4 Thank you received: 2	That is awesome to see something old brought back to life again...It looks like you bought a boat so you would have the parts to make templates for new parts. I don't feel near as bad after finding a rotten keel stringer and bulkhead in my CVX-20 now. Karsten Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118347

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Yeah Karsten, I paid too much for a pattern boat! lol Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118427

Karsten Offline Junior Boarder Posts: 104 Karma: 4 Thank you received: 2	Waterwings wrote: Yeah Karsten, I paid too much for a pattern boat! lol Bob Bob, Hopefully you didn't take my comment wrong....I meant the up most respect for your ability in wood work to take something as you have and make all new parts. Karsten Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118430

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	No no just a poke at myself for not doing my homework BEFORE buying the boat. lol Hell I thought it was just a month or two of work to clean it up, little did I know. Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118544

Karsten
Offline
Junior Boarder
Posts: 104
Karma: 4
Thank you received: 2

Waterwings wrote:

No no just a poke at myself for not doing my homework BEFORE buying the boat. lol Hell I thought it was just a month or two of work to clean it up, little did I know.

Bob

Bob,

Don't feel bad as anyone that has lived long enough has made these kind of buys only to find out they were in for a lot more than they had expected.

I bought a 1973 Corvette said to have been in mint condition and had it shipped 2500 miles...needs all new interior, sent it up for a cam, new manifold and carb to find out it had a low powder truck motor, no shocks, brushing and the list went on.

A 3 week job turned into 1.5 years it the shop.

Now everything that could be replaced, has been....next stop the interior shop.

Karsten

Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118573

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Karsten, Always did love that body line of vette, well until they went all plastic front and back bumper. Sorry to hear that but always good to know you're not alone! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118718

Waterwings Topic Author Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	So how do you make it snow inside your boat shed? With one of these of course! Keels roughed in, now on to the chines then route the plank beds. Bob Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118724

frog Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	ya bob, those power planers sure can make a lot of wood chips. I use one to clean up logs for furniture . headbords , coffee tables, end tables and so on. the boat looks better with every post you do. greg Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:'53 18' Century Resorter finally 8 years 11 months ago #118730

63 Sabre Offline Contributing Member Posts: 4676 Karma: 147 Thank you received: 167	Good progress Bob. At least you don't have to shovel that stuff. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

TOPIC: '53 18' Century Resorter finally

Re:'53 18' Century Resorter finally 9 years 3 months ago #115156

Re:'53 18' Century Resorter finally 9 years 3 months ago #115159

Re:'53 18' Century Resorter finally 9 years 2 months ago #115193

Re:'53 18' Century Resorter finally 9 years 2 months ago #115213

Re:'53 18' Century Resorter finally 9 years 2 months ago #115223

Re:'53 18' Century Resorter finally 9 years 2 months ago #115263

Re:'53 18' Century Resorter finally 9 years 2 months ago #115269

Re:'53 18' Century Resorter finally 9 years 2 months ago #115271

Re:'53 18' Century Resorter finally 9 years 2 months ago #115274

Re:'53 18' Century Resorter finally 9 years 2 months ago #115287

Re:'53 18' Century Resorter finally 9 years 2 months ago #115301

Re:'53 18' Century Resorter finally 9 years 2 months ago #115309

Re:'53 18' Century Resorter finally 9 years 2 months ago #115346

Re:'53 18' Century Resorter finally 9 years 2 months ago #115441

Re:'53 18' Century Resorter finally 9 years 2 months ago #115444

Re:'53 18' Century Resorter finally 9 years 2 months ago #115446

Re:'53 18' Century Resorter finally 9 years 2 months ago #115461

Re:'53 18' Century Resorter finally 9 years 2 months ago #115469

Re:'53 18' Century Resorter finally 9 years 2 months ago #115484

Re:'53 18' Century Resorter finally 9 years 2 months ago #116109

Re:'53 18' Century Resorter finally 9 years 2 months ago #116115

Re:'53 18' Century Resorter finally 9 years 2 months ago #116119

Re:'53 18' Century Resorter finally 9 years 2 months ago #116172

Re:'53 18' Century Resorter finally 9 years 2 months ago #116188

Re:'53 18' Century Resorter finally 9 years 3 weeks ago #117579

Re:'53 18' Century Resorter finally 9 years 2 weeks ago #117610

Re:'53 18' Century Resorter finally 9 years 1 week ago #118033

Re:'53 18' Century Resorter finally 9 years 1 week ago #118038

Re:'53 18' Century Resorter finally 9 years 6 days ago #118059

Re:'53 18' Century Resorter finally 9 years 6 days ago #118092

Re:'53 18' Century Resorter finally 9 years 6 days ago #118097

Re:'53 18' Century Resorter finally 8 years 11 months ago #118339

Re:'53 18' Century Resorter finally 8 years 11 months ago #118347

Re:'53 18' Century Resorter finally 8 years 11 months ago #118427

Re:'53 18' Century Resorter finally 8 years 11 months ago #118430

Re:'53 18' Century Resorter finally 8 years 11 months ago #118544

Re:'53 18' Century Resorter finally 8 years 11 months ago #118573

Re:'53 18' Century Resorter finally 8 years 11 months ago #118718

Re:'53 18' Century Resorter finally 8 years 11 months ago #118724

Re:'53 18' Century Resorter finally 8 years 11 months ago #118730

Donate

Glassified Ads

Mercury outboard( / Engines)

Classic Mercury Outboard Motors( / Engines)

1958 Skagit Sportster( / Boats)

FG Login

FiberGoogle

Who's Online

Mercury outboard
( / Engines)

Classic Mercury Outboard Motors
( / Engines)

1958 Skagit Sportster
( / Boats)